Table of Contents
Advertisement
„ Configuring KSave Settings
y
Standard
z
Auto Switch
Dual
1
Independent1
Dual
2
Independent3
3
Dual Same1
4
Dual Same3
# The image quality mode may change if you change the option selected for [KSave
Settings] or replace a memory card with one that can contain a different amount of
additional photographs. Check the image quality mode before taking photographs.
%When [z] (Auto Switch) is selected for [KSave Settings], the camera will automatically
switch between the last picture on the first card and the first picture on the second card.
„ Configuring nCard Slot Settings
5
Movies are recorded on the card in slot 1.
4
Movies are recorded on the card in slot 2.
Pictures are recorded to the memory card in the slot selected for
[KSave Slot] (P. 242). Shooting ends when the card is full.
Pictures are recorded to the memory card in the slot selected
for [KSave Slot] (P. 242). Pictures will be recorded to the
remaining card when the card in the selected slot fills. This
setting automatically reverts to [Standard] when only one
memory card is inserted.
Each picture is recorded twice, once in each of two different
image quality formats. Choose an image quality for each slot
(P. 140). Shooting ends when either card is full. Image quality is
set separately for each slot; after changing the option selected,
check the current image quality setting.
Each picture is recorded twice, once in each of two different
image quality formats. Choose an image quality for each slot
(P. 140). Recording continues to the card in the remaining slot
when either card fills. Image quality is set separately for each
slot; after changing the option selected, check the current image
quality setting.
Each picture is recorded twice, once to each card, using the
option currently selected for image quality. Shooting ends when
either card is full. This setting automatically reverts to [Standard]
when only one memory card is inserted.
Each picture is recorded twice, once to each card, using the
option currently selected for image quality. Recording continues
to the card in the remaining slot when either card fills. This
setting automatically reverts to [Standard] when only one
memory card is inserted.
7
243
EN
Advertisement
Table of Contents
