Copying Pictures To The Computer (Storage/Mtp) - Olympus OM System OM-1 Instruction Manual

6 Process RAW images.
• Adjustments can be made to the shooting settings available on the camera and RAW
pictures processed accordingly.
• The processed copies will be saved in JPEG format.
• Enabling USB RAW data editing cancels any changes previously made in the edit
window.
• USB RAW data editing is not available when two or more cameras are connected.
• See online help for more information on using the software.
Copying Pictures to the Computer
When connected to a computer, the camera can function as external storage in much
same way as a hard drive or other external storage device. Data can be copied from
the camera to the computer.
After confirming that the camera is off, connect it to the computer using the
1
USB cable.
2
Turn the camera on.
• The camera will display a message prompting you to identify the device to which the
USB cable is connected.
• If the message is not displayed, select [Select] for [USB Mode] (P. 252).
8
• If the batteries are very low, the camera will not display a message when connecting
to a computer. Be sure the batteries are charged.
Highlight [Storage] or [MTP] using FG and press
3
the Q button.
[Storage]: The camera functions as a card reader.
[MTP]: The camera functions as a portable device.
4
The camera will connect to the computer as new storage device.
# Data transfer is not guaranteed in the following environments, even if your computer
is equipped with a USB port.
Computers with a USB port added by means of an extension card, etc., computers
without a factory-installed OS, or home-built computers
# Camera functions cannot be used while the camera is connected to the computer.
# If the computer fails to detect the camera, disconnect and reconnect the USB cable.
# When [MTP] is selected, movies exceeding 4 GB cannot be copied to the computer.
286 EN
(Storage/MTP)
USB
Storage
MTP
0RAW/Control
USB PD
Exit
OK