(Multi Function Settings); Histogram Exposure Warning (Histogram Settings) - Olympus OM System OM-1 Instruction Manual

Choosing the Settings Available via Multi-Fn
Choose the settings that can be accessed via multi-function buttons.
Menu
Select an indicator you wish to display when the INFO button is pressed, and
1
put a check (v) next to it.
• Select an option using FG and press the Q button to put a check (v) next to it. To
remove the check, press the Q button again.
Highlight&Shadow Control
6
Color Creator
KISO
nISO
KWB
nWB
Magnify
Image Aspect
KLV Mode
Peaking
Histogram Exposure Warning
Choose the brightness levels that the histogram shows as overexposed (highlights)
or underexposed (shadows). These levels are used for exposure warnings in the
histogram displays during shooting and photo playback.
• The areas shown in red or blue in the monitor and viewfinder [Highlight&Shadow] displays
are also selected according to the values chosen for this option.
Menu
Highlight
Shadow
236 EN
MENU n G n 5. Grid/Other Displays n Multi Function Settings
Change the setting using the front and rear dials. Press
the INFO button to change the area (highlight, midtone,
shadow) to be configured.
Use the front dial to adjust hue and the rear dial to adjust
saturation.
Change the setting using the front and rear dials.
A zoom frame will be displayed.
Change the setting using the front and rear dials.
The setting switches between [Standard] and [S-OVF]
with each press of the button.
Turns on and off with each press of the button.
MENU n G n 5. Grid/Other Displays n Histogram Settings
Choose the minimum brightness for the highlight warning.
[245] – [255]
Choose the maximum brightness for the shadow warning.
[0] – [10]

(Multi Function Settings)

P A S M B
(Histogram Settings)
P A S M B
n
n