Mode Setup - Using Function Settings For Easy Camera Operation - Olympus CAMEDIA C-2040 Zoom Instructions Manual

MODE SETUP - Using function settings for easy camera operation

To make the camera even easier to use, you can use the mode setup option
to customize various camera functions. The functions you can customize
include basic camera operations such as adjusting the monitor brightness,
selecting the units of length displayed in the screens, and selecting the
camera's operating beep tones.
1
Press the
The Menu screen appears.
2
Press
arrow pad to select "MODE
SETUP" and then press
to select "SETUP".
3
Press the [OK] button.
The MODE SETUP screen
appears.
4
Press
the desired setting and
then press
8
Either the current setting or
"SETUP" will appear on the screen.
Use the appropriate procedure for
the setting you want to customize.
You cannot take pictures while
the MODE SETUP screen is
displayed.
This screen shows the still
shooting MODE SETUP menu.
ALL RESET ON
+ RED
WB
• • • • • •
-
NORMAL
SHARPNESS
CONTRAST NORMAL
[ 1 / 4
Example: When "ALL RESET" is selected
Always return to the Menu screen from the MODE SETUP screen by pressing the [OK] button.
If you use the
170
(Menu) button.
or on the
or to select
.
BLUE
]
ALL RESET
+
WB
-
SHARPNESS CUSTOM
CONTRAST
[ 1 / 4
(Menu) button to return to the Menu screen, the settings are not saved.
3
P F2.0 1/800 0.0
CARD
SETUP
MODE
SETUP
A/S/M
MODE
AE LOCK
(This screen shows the still picture
OFF
ON
]
Example: When "
2 4
1
SETUP
[ 3 / 3 ]
shooting menu.)
ALL RESET
SETUP
WB
SHARPNESS
CONTRAST
[ 1 / 4 ]
" is selected
WB