132
4-3. Media operation
®
●
Bluetooth
tered when the Bluetooth
connected to the Bluetooth
system. When selling or disposing of
the vehicle, remove the Bluetooth
audio information from the system.
(P.59)
●
In some situations, sound output via
the Bluetooth
out of sync with the connected device
or output intermittently.
WARNING
●
Do not operate the player's controls
or connect to the Bluetooth
system while driving.
●
Your audio unit is fitted with
®
Bluetooth
implantable cardiac pacemakers,
cardiac resynchronization therapy-
pacemakers or implantable cardio-
verter defibrillators should maintain
a reasonable distance between
themselves and the Bluetooth
antennas. The radio waves may
affect the operation of such
devices.
●
Before using Bluetooth
users of any electrical medical
device other than implantable car-
diac pacemakers, cardiac resyn-
chronization therapy-pacemakers
or implantable cardioverter defibril-
lators should consult the manufac-
turer of the device for information
about its operation under the influ-
ence of radio waves. Radio waves
could have unexpected effects on
the operation of such medical
devices.
YARIS GR Navigation and Multimedia System Owner's Manual_Europe_M52L14_en
device information is regis-
®
device is
®
audio
®
®
audio system may be
®
audio
antennas. People with
®
®
devices,
NOTICE
●
Do not leave your portable player in
the vehicle. In particular, high tem-
peratures inside the vehicle may
damage the portable player.
Registering/Connecting a
®
Bluetooth
device
®
To use the Bluetooth
tem, it is necessary to register a
®
Bluetooth
device with the system.
Registering an additional device
1
Display the Bluetooth
control screen. (P.130)
2
Select "Connect".
3
Select "Add device".
When another Bluetooth
is connected, a confirmation
screen will be displayed. To dis-
connect the Bluetooth
select "Yes".
4
Follow the steps in "Registering
®
a Bluetooth
phone for the first
time" from step 5. (P.34)
Selecting a registered device
1
Display the Bluetooth
control screen. (P.130)
2
Select "Connect".
3
Select the desired device to be
connected.
4
Check that a confirmation
screen is displayed when the
connection is complete.
If an error message is displayed,
audio sys-
®
audio
®
device
®
device,
®
audio