Toyota GR YARIS Quick Manual page 116

116
4-1. Basic operation
Reordering the audio source
1
Display the audio source selec-
tion screen. (P.115)
2
Select "Reorder".
3
Select the desired audio source
then or
USB port
1
Connect a device to the USB
port.
 Turn on the power of the device
if it is not turned on.
●
If a USB hub is plugged-in, two
devices can be connected at a time.
●
Even if a USB hub is used to connect
more than two USB devices, only the
first two connected devices will be
recognized.
●
If a USB hub that has more than two
ports is connected to the USB port,
devices connected to the USB hub
may not charge or be operable, as the
supply of current may be insufficient.
Sound settings
1
Display the audio control
screen. (P.114)
YARIS GR Navigation and Multimedia System Owner's Manual_Europe_M52L14_en
to reorder.
2
Select "Sound".
3
Select the desired item to be
set.
A Select to set the tre-
ble/mid/bass. (P.116)
B Select to set the fader/balance.
(P.117)
C Select to set the automatic
sound leveliser. (P.117)
■ Treble/Mid/Bass
How good an audio program
sounds is largely determined by the
mix of the treble, mid and bass lev-
els. In fact, different kinds of music
and vocal programs usually sound
better with different mixes of treble,
mid and bass.
1
Select "Treble/Mid/Bass".
2
Select the desired screen but-
ton.