Toyota GR YARIS Quick Manual page 40

40
2-2. Connectivity settings
 If an error message is displayed,
follow the guidance on the
screen to try again.
●
It may take time if the device connec-
tion is carried out during Bluetooth
audio playback.
●
Depending on the type of Bluetooth
device being connected, it may be
necessary to perform additional steps
on the device.
●
When disconnecting a Bluetooth
device, it is recommended to discon-
nect using this system.
Connecting a Bluetooth
device in a different way
(from phone top screen)
P.166
Connecting a Bluetooth
device in a different way
(from phone setup screen)
P.180
Connecting a Bluetooth
device in a different way
(from Bluetooth
screen)
P.132
■ Auto connection mode
To turn auto connection mode on,
set "Bluetooth power" to on.
(P.43) Leave the Bluetooth
device in a location where the con-
nection can be established.
 When the engine switch is turned
YARIS GR Navigation and Multimedia System Owner's Manual_Europe_M52L14_en
 The system will connect with the
®
®
®
®
■
When the auto connection has
failed or "Bluetooth power" is turned
off, it is necessary to connect the
Bluetooth
1
®
2
®
■
®
audio
If a Bluetooth
nected due to poor reception from
the Bluetooth
engine switch is in ACC or ON, the
system automatically reconnects
the Bluetooth
®
to ACC or ON, the system
searches for a nearby registered
device.
registered device that was last
connected, if it is nearby. When
automatic connection priority is
set to on and there is more than
one registered Bluetooth
available, the system will auto-
matically connect to the
®
Bluetooth phone with the high-
est priority. (P.43)
Connecting manually
®
device manually.
Display the Bluetooth
screen. (P.38)
Follow the steps in "Connecting
®
a Bluetooth device" from step
2. (P.39)
Reconnecting the Bluetooth
phone
®
phone is discon-
®
network when the
®
phone.
®
phone
®
settings
®