3
Check that the following screen
is displayed when the device is
found.
If the device has been connected
to the system before, this screen
may not be displayed and the
®
Miracast
immediately.
4
Select the system name on the
smartphone.
5
Select "Yes".
6
Check that Miracast
screen is displayed.
Depending on the device con-
nected, it may take approxi-
mately 5 to 15 seconds before
the Miracast
is displayed.
●
The signal strength/status of the Wi-
®
Fi
connection (P2P mode) is dis-
played on the upper right side of the
YARIS GR Navigation and Multimedia System Owner's Manual_Europe_M52L14_en
connection may start
®
operation
®
operation screen
4-3. Media operation
screen. (P.15)
●
To check the Miracast
®
Wi-Fi
setting screen (P.45)
®
●
Miracast
will not be available at the
same time using Wi-Fi
(P2P mode).
135
®
setting on the
®
connection
4