8
|
Electrical installation
8 Electrical installation
In this chapter
8.1 About connecting the electrical wiring
8.1.1 Precautions when connecting the electrical wiring
Installer reference guide
26
NOTICE
This is a class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
8.1
About connecting the electrical wiring ..................................................................................................................................
8.1.1
Precautions when connecting the electrical wiring ..............................................................................................
8.1.2
Guidelines when connecting the electrical wiring ................................................................................................
8.2
To connect the electrical wiring to the BEV2 unit .................................................................................................................
Before connecting the electrical wiring
Make sure the refrigerant piping is connected and checked.
Typical workflow
Connecting the electrical wiring typically consists of the following stages:
1
Making sure the power supply system complies with the electrical
specifications of the units.
2
Connecting the electrical wiring to the outdoor unit.
3
Connecting the electrical wiring to the indoor unit.
4
Connection the electrical wiring to the BEV2 unit.
5
Connecting the main power supply.
DANGER: RISK OF ELECTROCUTION
WARNING
ALWAYS use multicore cable for power supply cables.
INFORMATION
Also read the precautions and requirements in the
4
precautions" [
WARNING
▪
All wiring MUST be performed by an authorised electrician and MUST comply
with the applicable legislation.
▪
Make electrical connections to the fixed wiring.
▪
All components procured on-site and all electrical construction MUST comply
with the applicable legislation.
4].
26
26
27
28
"2 General safety
BEV2N-A
CO₂ Conveni-Pack: BEV2 unit
4P677928-1 – 2021.10