Pioneer PDP-505MX Service Manual page 67

5
6.2.4.3 Key command
Rem Code Key Name
AA0E INPUT 2
AA56 INPUT 3
AA8A SET
AA8B MENU
AA96
AA95
AA94
AA97
AA1C STANDBY/ON
6.2.4.4 Timing mode and pattern for the auto white balance function
The auto white balance is not supported in this service factory mode
6.2.4.5 Description of Adjustment Item
Item
PHX_1_0_BASIC_JP Current F/W Version
Service factory Mode
Service factory Mode with INPUT2
INPUT2
Execute the phase, clock and position adjustment
Auto Adjustment
automatically
Initial EEPROM Execute the initial setting of EEPROM device
Color Temperature Change the color temperature setting value.
R-GAIN Gain value for Red Channel of ADC device
G-GAIN Gain value for Green Channel of ADC device
B-GAIN Gain value for Blue Channel of ADC device
R-BIAS Black level for Red Channel of ADC device
G-BIAS Black level for Green Channel of ADC device
B-BIAS Black level for Blue Channel of ADC device
5
6
Key Pad
INPUT/SET Choose the input to VGA input 2
INPUT/SET Choose the input for DVI
MENU Function Set
MENU Open/Close the MENU
RIGHT+ Select the upper item
VOL + Execute the function
VOL- Execute the function
RIGHT- Select the lower item
Power Off and Exit the Service factory Mode
Description
PDP-505MX
6
7
Function
Adjustment Range
None
None
Enable/Disable For Japanese model only
Yes/No
Low/Middle-Low/Middle
/Middle-High/High
0~512
0~512
0~512
0~512
0~512
0~512
7
8
A
Remarks
For Japanese model
For North america and
general area models
B
C
Remarks
D
E
F
67
8