Accorroni LC 16 Technical Information page 3

GENERAL INFORMATION for proper installation
It contains all the news related to the description of the devices and their technical characteristics.
TECHNICAL INFORMATION FOR THE INSTALLER
It collects all the technical details and recommendations that the installer must comply with to realize the project.
Important notes for the consultation:
1 For the purposes of a correct and safe use of the device, the designer, the installer, the user and the service
to their respective responsibilities, are required to comply with what is indicated in this manual.
It must be kept for future reference and must accompany the machine for its entire lifespan, including the case
of transfer to third parties.
2 WARNING! Following information that, because of their importance, must be scrupulously observed and for
which non-compliance can result in damage and / or impair the safety of use. The paragraphs highlighted in
bold contain information, warnings or important tips that you should carefully evaluate.
3 The A2B Accorroni E.G. LTD accepts no responsibility for any damage caused by improper use, to a use other
than that prescribed and by an incomplete or approximate application of the instructions contained in this
manual.
4 The technical data, styling characteristics, components and accessories listed in this manual are not binding.
The A2B Accorroni E.G. LTD reserves the right to introduce at any time whatever modifications deemed
necessary to the improvement of its product.
5 References to laws, regulations and technical rules mentioned in this manual are for information only and to
be considered valid at the date of printing, as indicated on the last page. The entry into force of new provisions
or amendments to current laws do not constitute grounds for any obligation of the A2B Accorroni
E.G. LTD against third parties.
6 The A2B Accorroni E.G. LTD is responsible for the conformity of his product to laws, directives and construction
standards in force at the time of commercialization. The knowledge and observance of the laws and standards
regarding plant design, installation, operation and maintenance are the exclusive responsibility for their respective
powers, the designer, installer and user.
Hanging unit heaters with
horizontal and vertical projection
SERIES "LC" destined for heating
3