Charger Errors - Spektrum S155 G2 Instruction Manual

Smart Settings
The Smart selection is available if a Smart battery is connected. Smart settings include:
Auto Storage
Charge Current
Charge Voltage
Storage Voltage
Battery History
Fault Log
Battery Update
Back
System Settings
Backlight
Volume
Completion Tone
Language
Auto Charge
System Self-Checking
System Information
Back

Charger Errors

If the charger displays an error, follow the on-screen prompts to remedy the error. If necessary,
disconnect the battery from the output and balance ports, disconnect the power supply, and restart the
charger. If there is still an error perform a "self-test" found in the System Settings menu.
To upgrade the firmware on your S155 charger use a standard USB cable to connect the charger (USB
Input port) to your PC or laptop. The latest firmware available for download and instructions are listed
under the manuals and support tab on the S155 product page at SpektrumRC.com or Horizonhobby.com.
Select to run Auto Storage function with a delay between 12 and 240 hours
Change the default charge current for your Smart battery
Select the charge voltage for your Smart battery
Select the storage voltage for each cell
Provides number of battery cycles, battery temp and production date
Provides a list of faults, including over-voltage, under-voltage or over-temperature,
and the date of exception
Update Smart battery firmware if an update is available
Return to the home screen
Low, Medium, High
Off, Low, Middle, High
Single or Repeat
Select language
On or Off
Initiates a charger self check. Do not connect a battery to the output port
while self check is running
View the charger's firmware version
Return to the home screen