Spektrum S155 G2 Instruction Manual page 7

WARNING: Always check charging
parameters before initiating the charge
process. Charging any battery with improper
settings, including charging a battery in the wrong
mode, can result in property damage and fire.
7. Scroll to the Start menu item.
8. Press and release the menu/select button to
begin charging.
During the charging process:
1. While the battery is charging the main screen
will provide:
• Charged percent
• Battery data
• Charge rate
• Capacity charged
• Charge time remaining (Smart batteries only)
• Total charge time
2. Scroll to the next screen to see additional cell
voltage information.
3. Scroll to the last screen to see the battery's
internal resistance.
4. When the fast charge cycle is complete, the
charger will beep once and the Battery Bar will
change to green. The charger is balancing the
battery cells.
To stop the charging cycle:
1. Press and release the back button during the charge
or press and hold the menu button.
2. Select the Stop menu item. The charger will stop
charging and return to the ready screen.
WARNING: Always stop the charging
cycle or remove power supplied to the
charger if you notice any irregularities (like a
swollen battery) during charging.
When charging is complete:
The charger will beep once to indicate the fast
charging is done. Once the charger is finished
balancing the battery's cells it will double beep twice.
1. The main screen will display a green battery bar
at the top to indicate the battery is full and the
charging process has finished.
2. The total capacity charged and total charge time
will be displayed
3. Disconnect the battery from the charger. The
battery is ready and the charger will return to
the home screen.
4. Press and hold the back button for 3 seconds to
put the carger into sleep mode. This will power
down the charger while not in use. Press any
button to restart the charger.
Charger Settings
Task Select Charge
Select the appropriate battery
Battery
(Type)
chemistry
Set the number of cells in the battery
(this value auto-detects if using a
Cells
(Cell Spektrum
Count)
battery balance lead is connected to
the balance port)
Current Set the charge current
Start Start the charge cycle
Voltage Set the end cell voltage
Smart
Configure the settings on your Smart
Battery
battery
Settings
System
Charger settings
Settings
Displays number of charger cycles
Charger
on the day, total number of cycles,
History
charger temperature, and input power
Smart battery or if the
™