Charge Screen; System Setting Menu; Charger Errors; Optional Parts - Spektrum S2100 Instruction Manual

Charge Screen

System Setting Menu

From the home screen, press and hold the menu button to access
the System Settings menu.
CH1-SMART Confi gure the settings on your SMART battery
CH2-SMART Confi gure the settings on your SMART battery
Backlight Low, Medium, High
Touch Sensitivity Low, High
USB Charge On, Off
Volume Off, Low, Middle, High
Completion Tone Single or repeat
Split Display Manual or Automatic
Language Select language
System Information Check the system information
Initiates a charger self-check. Do not connect a
System Self-Checking
battery to the output port while self-check is running
Back Return to the home screen

Charger Errors

If the charger displays an error, follow the on-screen prompts to remedy the error. If necessary, disconnect the battery from the output and
balance ports, disconnect the power supply, and restart the charger.

Optional Parts

Part #
SPMXCA507 IC5 Device to IC3 Battery 4" / 100mm; 10 AWG
SPMXCA310 IC3 Device to JST Device
SPMXCA309 IC3 Device to JST PH2.0 Device
Background Screen Operating Time
(color indicates
charge cycle)
Active Charging Current
Battery Type
and Active Task
Battery
Information
Screen
(cell voltage shown)
Description
Percentage of
Full Charge
SMART Settings
The SMART selection is available if a SMART smart battery is
connected. SMART settings include:
Auto Storage
Storage Voltage
Charge Current
Charge Voltage
Exception Record
Back
Part #
IC3 Battery Parallel Y-Harness 6" / 150mm;
SPMXCA307
13 AWG
5
Capacity
Charged
Select an Auto Storage cycle of between
12 and 240 hours
Select the storage voltage for each
cell
Change the default charge current for
your SMART battery
Select the charge voltage for your
SMART battery
Provides a list of exceptions, including
over-voltage, under-voltage or over-
temperature, and the date of exception.
Return to the home screen
Description
EN