Charger Errors - Spektrum S1100 Instruction Manual

Smart Settings
The Smart selection is available if a Smart battery is connected. Smart settings include:
Auto Storage Select to run Auto Storage function with a delay between 12 and 240 hours
Charge Current Change the default charge current for your Smart battery
Charge Voltage Select the charge voltage for your Smart battery
Storage Voltage Select the storage voltage for each cell
Battery History Provides number of battery cycles, battery temp and production date.
Fault Log Provides a list of faults, including over-voltage, under-voltage or over-temperature, and the date of exception.
Back Return to the home screen
System Settings
Backlight Low, Medium, High
Volume Off, Low, Middle, High
Completion Tone Single or Repeat
Touch Sensitivity Low, High
Language Select language
System Self-Checking Initiates a charger self check. Do not connect a battery to the output port while self check is running.
System Information View the charger's fi rmware version
Back Return to the home screen

Charger Errors

If the charger displays an error, follow the on-screen prompts to remedy the error. If necessary, disconnect the battery from the output and
balance ports, disconnect the power supply, and restart the charger.
*Visit the S1100 Smart Charger's product page on www.horizonhobby.com for more information and optional accessories.
EN
6