Related Manuals for Majacraft Little Gem
Summary of Contents for Majacraft Little Gem
- Page 1 Your new Little spinning wheel majacraft all you need to spin your dreams... majacraft...
- Page 2 Thank you for choosing Majacraft, it is your belief in us that drives our innovation and creativity in building captivating tools for you.
- Page 3 Assembling a Majacraft Little Gem These instructions demonstrate how to assemble your Majacraft Little Gem spinning wheel. 1. Prepare the components We recommend that you find a clear work area where you can lay out all the components for working on them.
- Page 4 Rotate the Base/Stem assembly round so you are looking at the front of the wheel. Push the slider knob away from the centre of the stem to lock the stem into the upright position. majacraft...
- Page 5 If plying, you may consider crossing this belt so the flyer runs backwards when you spin in the normal “forward” direction. This is a suggestion that you may find easier when you come to ply your yarn. majacraft...
- Page 6 It may also be treadled on by holding the flyer in one hand and treadling the wheel in an anticlockwise direction. The tension spring should be positioned leaning to the right hand side as shown in the picture. majacraft...
- Page 7 Little Gem looking excellent into the future. Your Majacraft Little Gem is now assembled and you are ready to start on a new spinning adventure! From the team at Majacraft, we wish you great spinning in the future.
- Page 8 Notes majacraft little_gem_assembly_1.04_13-05-2021...
Need help?
Do you have a question about the Little Gem and is the answer not in the manual?
Questions and answers
When I am spinning on the little gem it is jerky. Is it the delta, brake band or uneven foot work?