Unfinished Furniture of Wilmington S-132 Assembly Instructions page 4

STEP 1
Attach seat frame (B) to the back (A) with bolts (3) and (1), and washers (6) and (7) as shown below.
Tighten with Allen key (8).
Note: DO NOT tighten any of the bolts, until the chair is assembled, then put on a flat level surface to
make sure the chair is level and then tighten the bolts.
STEP 2
Attach front legs (D) to the seat frame (B) with bolts (2), and washers (6) and (7) as shown below.
Tighten with Allen Key (8).
Attach front stretcher (F) between front legs (D), then attach side stretchers (E) to front and back legs
with screws (4) as shown below. Tighten with a screwdriver.
ITEM NO.: S-132 Printed in Vietnam
REVISED MAR 19, 2018
- 4 -