GE Profile P2B918SEMSS Owner's Manual & Installation Instructions page 56

Before you call for service...
Troubleshooting Tips
Problem
Fan noise
Convection fan
not working
Drawer does not slide
smoothly or drags
Lower oven drawer or
warming drawer will
not work
Excessive condensation
in the drawer
Food dries out in the
lower oven drawer or
warming drawer
56
Possible Causes
The convection fan may turn on
and off automatically.
Preheat temperature
not reached.
The drawer is out of alignment.
Drawer is overloaded or load
is unbalanced.
A fuse in your home may be
blown or the circuit breaker
tripped.
The upper oven is self-cleaning.
Controls improperly set.
Liquid in drawer.
Uncovered foods.
Temperature setting too high.
Moisture escaping.
Oven drawer not fully closed.
What To Do
• This is normal. The convection fan will run until the
function is over or the door is opened.
• Fan will start automatically once the preheat
temperature is reached.
• Fully extend the drawer and push it all the way in.
See the Care and cleaning of the range section.
• Reduce weight. Redistribute drawer contents.
• Replace the fuse or reset the circuit breaker.
• Wait for the self-clean cycle to finish and the oven
to cool.
• See the Lower oven drawer section.
• Remove liquid.
• Cover food with lid or aluminum foil.
• Reduce temperature setting.
• Cover food with lid or aluminum foil.
• Push drawer in until latch engages.