Settings.
38
Auto Recipe
Conversion
™
When using convection bake, the Auto Recipe
Conversion feature automatically changes entered
traditional baking temperatures to convection
baking temperatures. For example, if you enter a
regular recipe temperature of 350°F and select
START, the display will show Con and then the
converted temperature of 325°F.
NOTE: This feature does not change traditional
baking times, only traditional baking temperatures.
Tones at the End of a Timed Cycle
At the end of a timed cycle, 3 short beeps will
sound followed by one beep every 6 seconds until
the CLEAR/OFF pad is pressed. This continuous
6-second beep may be canceled.
To turn the continuous 6-second beep
ON or OFF:
Select SETTINGS and then select
MORE twice.
Fahrenheit or Celsius Temperature
Your oven control displays the temperature in
Fahrenheit (°F), but you may change this to display
the temperature in Celsius (°C).
To change the temperature display between
Fahrenheit or Celsius:
Select SETTINGS and then select
MORE .
Tone Volume
This feature allows you to adjust the tone
volumes to a more acceptable level. There are
three possible volume levels.
To change the volume level:
Select SETTINGS and then select
MORE twice.
Select BEEPVOLUME . Each time the
volume level is changed, the tone
you hear is an audible indication of
the volume level. Select 2 BEEP for
the middle volume level. Select
3 BEEP for the loudest volume level.
Select 1 BEEP for the quietest
volume level.
™
To turn this option ON or OFF:
Select SETTINGS and then select
MORE .
Select CONVTEMP to turn the option
ON or OFF .
After setting this option, select
HOME .
Select BEEPONCE to turn the
continuous 6-second beep OFF .
Select FULL BEEP to turn the
continuous 6-second beep ON .
After setting this option, select
HOME .
Select TEMP°F to display the
temperature in Fahrenheit (°F).
Select TEMP°C to display the
temperature in Celsius (°C).
After setting this option, select
HOME .
After choosing the desired sound
level ( 1 BEEP, 2 BEEP or 3 BEEP ),
select HOME .
Need help?
Do you have a question about the Profile JS998SKSS and is the answer not in the manual?