Electrical Safety; Package Contents; Description (Fig. A); Assembly And Adjustments - DeWalt D36000 Original Instructions Manual

Electrical Safety

The electric motor has been designed for one voltage only. Always check that the power
i supply corresponds to the voltage on the rating plate.
Your D WALT tool is double insulated in accordance with EN60745; therefore no earth
e
wire is required.
This product is intended to be used with a safety transformer manufactured to BSEN61558 and
BS4343. Never work without this transformer in place.
If the supply cord is damaged, it must be replaced only by D
service organisation.
Mains Plug Replacement
(U.K. & Ireland Only)
If a new mains plug needs to be fitted:
• Safely dispose of the old plug.
• Connect the brown lead t o the live terminal in the plug.
• Connect the blue lead to the neutral terminal.

WARNING: No connection is to be made to the earth terminal.
Follow the fitting instructions supplied with good quality plugs. Recommended fuse: 13 A.
Using an Extension Cable
If an extension cable is required, use an approved 3–core extension cable suitable for the
power input of this tool (see Technical Data).The minimum conductor size is 1.5 mm
maximum length is 30 m.
When using a cable reel, always unwind the cable completely.
Portable Residual Current Device
The machine is equipped with a portable residual current device (PRCD), which protects the
user against electric shock by interrupting the circuit when a leakage current of 10mA or
greater is detected.

WARNING: Never operate the machine without the PRCD in place. Do not use the
machine if the PRCD does not function properly. For the PRCD to work, the machine must
be connected to an earthed wall socket. Before using the tile saw, check the function of
the PRCD, pressing the TEST button.

Package Contents

The package contains:
1 Motor arm assembly
1 Saw frame assembly
1 Water basin
1 Water pump
1 Cutting disc
1 Cutting cart
1 Extension table
1 Edge guide
2 Rear water attachments
2 Cutting cart water attachments
1 Splash guard
6 Hex screws
1 Hex key
1 Cutting wheel wrench
1 Instruction manual
• Check for damage to the tool, parts or accessories which may have occurred during transport.
• Take the time to thoroughly read and understand this manual prior to operation.
Labels on tool
The following pictographs are shown on the tool.
Read the instruction manual before use.
Do not use recessed cutting discs.
Wear safety goggles.
WALT or an authorised
e
2 ; the
Always wear regular working gloves while operating this tool.
Always wear ear protection.
WARning! Sharp edges.
On/off switch: position I (on) and 0 (off).
Carrying point
Do not place your hands within this area.
Maximum depth of cut
80 mm
25.4 mm
Cutting disc bore
Date Code Position (Fig. A)
The date code 22 , which also includes the year of manufacture, is printed into the housing.
Example:
Year and week of Manufacture

Description (Fig. A)


WARNING: Never modify the power tool or any part of it. Damage or personal injury
could result.
On/Off switch
1
Motor arm assembly
2
Plunge handle
3
Head lock knob
4
Cutting disc cover
5
Cutting disc
6
Rubber shroud
7
Small rear water attachment
8
9 Large rear water attachment
10 Splash guard
11 Cutting cart assembly
Intended Use
Your D36000 tile saw has been designed for professional wet tile cutting applications. Using
the appropriate diamond saw blade, diameter 250 mm, it can cut concrete, brick, porcelain
and ceramic materials. Providing optimum versatility, the machine performs the cutting
operations of straight cutting (ripping), diagonal cutting, plunge cutting and bevel cutting
easily, accurately and safely.
This machine is not to be used for any operation other than those mentioned in this manual.
DO nOT use under wet conditions or in the presence of flammable liquids or gases.
DO nOT let children come into contact with the tool. Supervision is required when
inexperienced operators use this tool.
Young children and the infirm. This appliance is not intended for use by young children
•
or infirm persons without supervision.
• This product is not intended for use by persons (including children) suffering from
diminished physical, sensory or mental abilities; lack of experience, knowledge or skills
unless they are supervised by a person responsible for their safety. Children should never
be left alone with this product.

ASSEMBLY AND ADJUSTMENTS


WARNING: To reduce the risk of serious personal injury, turn tool off and
disconnect tool from power source before making any adjustments or removing/
installing attachments or accessories. An accidental start‑up can cause injury.

WARNING: Use only D
WALT battery packs and chargers.
e
ASSEMBLY

WARNING: Prior to assembly always unplug the tool.

WARNING: When assembling the machine, always follow the instructions in the order as
described below.
Unpacking the Machine and Its Parts

WARNING: When moving the machine, always seek assistance. The machine is too heavy
for one person to handle.
1. Remove the loose packaging material from the box.
2. Lift the machine parts out of the box.
3. Remove any remaining packing material from the machine parts.
2020 XX XX
Small cutting cart water attachment
12
Large cutting cart water attachment
13
Extension table
14
Water basin
15
Saw frame assembly
16
Water nozzles
17
Cutting cart stop
18
Edge guide
19
20 Cutting wheel cover screw
21 Accessory storage
English
7