GE Profile JD968 Installation Instructions Manual page 9

Installation Instructions
Standard Installation Instructions
D
Installing the Anti-Tip Bracket
D1
The anti-tip bracket is attached to
the back of the Drop-In Range. It is
designed to fit under the bottom of the
countertop opening at the rear. Measure
counter thickness at back of cutout to
determine correct bracket location.
ANTI-TIP INSTALLATION
Interior Wall
1/4" Min. Flat Area
Glass
Maintop
Anti-Tip
Bracket
Bottom of
Countertop
to Engage
Bracket by
1/2" Min.
Select the proper position for the countertop
thickness and move bracket to proper position.
(Unit is supplied with bracket in position 1.)
1 For 3/4" Counter
2 For 1.18" (3 cm) Counter
3 For 1.5" Counter
Glass Cooktop
Wall Stud
Countertop
Thickness
Bottom of
Countertop
Wire Cover
Non-Kit Application
Position #5
Non-Kit
Application
Anti-Tip Bracket
*Attachment
9
Anti-Tip Bracket Location
ALTERNATE
ANTI-TIP INSTALLATION
Interior Wall
Glass Maintop
Attachment
To Engage
Bracket By 1/2" Min.
4 For 3.5"
5 Alternate
(shown below)
(Rear of Range)
Wall Stud
Countertop
Surface
10-3/8"
Wire
Cover
1-1/2"
Attachment
Anchored
To Wall Stud
Is Required
(Continued on following page)