GE Profile JD968 Installation Instructions Manual page 12

Installation Instructions
Standard Installation Instructions
D
Replacing the Oven Door
NOTE: The oven door is heavy. You
may need help lifting the door high
enough to slide it into the hinge slots.
Do not lift the door by the handle.
Lift the oven door by
D7
placing one hand on
each side. The door is
heavy, so you may need
help. Do not lift the door
by the handle.
With the door at the same angle as
D8
the removal position (halfway between
the closed and broil stop position,
seat the notch of the hinge arm into
the bottom edge of the hinge slot.
The notch of the hinge arm must be
fully seated into the bottom of the slot.
Bottom Edge
of Slot
Open the oven door as far as it
D9
will open.
Hinge Arm
Hinge Notch
Push the hinge locks up against the
D10
front frame of the oven cavity, to the
locked position.
Notch of Hinge
Securely Fitted
into Bottom of
Hinge Slot
Close the oven door.
D11
Check for Proper Installation
D12
of Anti-Tip Bracket
Lower the oven door and gently apply
medium force at the handle end until
movement of the range is detected.
Continue pressing until the anti-tip
bracket is engaged and movement
stops. A small amount of movement is
acceptable at the back of the range
top, but it should be stable and not tip
once the anti-tip bracket is engaged.
12
cont.
Hinge in
Locked Position