Advertisement
04-2. Precautions for connector unmating
(1)Hold the reinforcing plate at unmating the connector.
(2)Lift straight up to unmate.
(3)If the method of unmating described above is not feasible due to a lack of space
around the connector, try the following methods.
- If the number of contacts is small, lift around one of the shorter sides of the
connector to unmate it.
- If the number of contacts is large, (e.g., 50 contacts or more), lift around one of
the longer sides of the connector, and then lift around the other longer side to
unmate. (Avoid completely lifting just from one side, which risks damaging the
connector.)
Panasonic Corporation
industrial.panasonic.com/ac/e/
Operation manual for Narrow-pitch connectors F4S
Lift up
©
- 22 -
Panasonic Corporation 2017
ACCTF5E-5 201704
Advertisement
