Ec Declaration Of Conformity - Black & Decker BDCDD18 Original Instructions Manual

Declaration of conformity
The Supply of Machinery (Safety)
Regulations 2008
BDCDD18 - Drill
Black & Decker declares that these products described
under "technical data" are in compliance with:
The Supply of Machinery (Safety) Regulations, 2008, S.I.
2008/1597 (as amended),
EN62841-1:2015, EN62841-2-1:2018+A11:2019.
These products conform to the following UK Regulations:
Electromagnetic Compatibility Regulations, 2016,
S.I.2016/1091 (as amended).
The Restriction of the Use of Certain Hazardous Sub-
stances in Electrical and Electronic Equipment Regula-
tions 2012, S.I. 2012/3032 (as amended).
For more information, please contact Black & Decker at
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the
technical file and makes this declaration on behalf of
Black & Decker.
Director - Consumer Power Tools
Black and Decker UK, 270 Bath Road, Slough
Black & Decker declares that these products described
These products also comply with Directive 2014/30/EU
and 2011/65/EU. For more information, please contact
Black & Decker at the following address or refer to the
The undersigned is responsible for compilation of the
technical file and makes this declaration on behalf of
Ed Higgins
Berkshire, SL1 4DX
United Kingdom
11/16/2020
(Original instructions)

EC declaration of conformity

%
MACHINERY DIRECTIVE
BDCDD18 - Drill
under "technical data" are in compliance with:
2006/42/EC, EN62841-1:2015, EN62841-2-
1:2018+A11:2019.
back of the manual.
Black & Decker .
General Manager, Benelux
Egide Walschaertsstraat 14-18
2800 Mechelen, Belgium
ENGLISH
Patrick Diepenbach
Black and Decker,
11/16/2020
11