Chute Replacement - Toro 39901 Service Manual

Chute Gear Installation (continued)

Chute Replacement

Chute Removal
Chute: Service and Repairs
g320303
14. Install the 2 screws securing the controller cover to the battery container skirt.
Torque the screws to 1.1-1.7 N • m (10-15 in-lb).
15. Install the chute control rod.
When removing or installing the battery, do not allow the battery
terminals to touch any metal parts of the machine. Do not allow
metal tools to short between the battery terminals and metal parts
of the machine.
16. Install the battery into the machine.
1. Park the machine on a level surface and wait for all moving parts to stop.
When removing or installing the battery, do not allow the battery
terminals to touch any metal parts of the machine. Do not allow
metal tools to short between the battery terminals and metal parts
of the machine.
2. Lift the battery cover and remove the battery from the machine.
3. Remove the chute gear.
4. Remove the 4 screws securing the rear chute to the housing.
Figure 50
WARNING
WARNING
Chute Gear Removal (page 6–4)
Page 6–14 60V MAX e21 Power Clear® Snow Thrower with
Flex—Force Power System® Service Manual
3438-775 Rev A