Motor Replacement - Toro 39901 Service Manual

Motor Driver Installation (continued)

Motor Replacement

Motor Removal
60V MAX e21 Power Clear® Snow Thrower with
Flex—Force Power System® Service Manual
3438-775 Rev A
g320303
3. Install the 2 screws securing the controller cover to the battery container skirt.
Torque the screws to 1.1-1.7 N • m (10-15 in-lb).
4. Install the chute control rod.
When removing or installing the battery, do not allow the battery
terminals to touch any metal parts of the machine. Do not allow
metal tools to short between the battery terminals and metal parts
of the machine.
5. Install the battery into the machine.
1. Park the machine on a level surface and wait for all moving parts to stop.
When removing or installing the battery, do not allow the battery
terminals to touch any metal parts of the machine. Do not allow
metal tools to short between the battery terminals and metal parts
of the machine.
2. Lift the battery cover and remove the battery from the machine.
3. Pull and remove the chute control rod from the machine.
4. Remove the motor driver from the machine.
Figure 68
WARNING
WARNING
Page 8–5
Motor Driver Removal (page 8–4)
Motor: Service and Repairs