Startup Guide; Step 1: Charging The Battery Pack - Sony A7RIII ILCE-7RM3A Operating Instructions Manual

Hide thumbs Also See for A7RIII ILCE-7RM3A:
Table of Contents

Advertisement

Startup guide

Step 1: Charging the battery pack

1
Insert the battery pack into
the battery charger.
• Place the battery pack on the
battery charger in the direction
of the .
• Slide the battery pack in the
direction of the arrow as far as it
will go.
2
Connect the power cord
(supplied) to the battery
charger, and connect the
battery charger to the wall
outlet (wall socket).
The CHARGE lamp on the battery
charger will light up in orange and
charging will start.
CHARGE lamp (orange)
Lit: Charging
Flashing: Charging error or
charging paused temporarily
because the camera is not within
the proper temperature range
• When charging is finished, the CHARGE lamp and all indicators turn off.
• Charging time (full charge): approximately 150 min. (when charging a fully
depleted battery pack at a temperature of 25°C (77°F))
• When you use a completely new battery pack or a battery pack that has
not been used for a long time, the CHARGE lamp may flash quickly when
the battery is charged for the first time. If this happens, remove the battery
pack and then re-insert it to recharge.
• Be sure to use only genuine Sony brand battery packs.
GB
24
CHARGE lamp
To a wall outlet
(wall socket)

Advertisement

Table of Contents
loading

Table of Contents