Notes On Using Your Camera - Sony A7RIII ILCE-7RM3A Operating Instructions Manual

Notes on using your camera

Along with this section, also see
"Precautions" in the Help Guide.
Notes on handling the product
• This camera is designed to be dust-
and moisture-resistant, but is not
waterproof or dust-proof.
• Do not leave the lens or the
viewfinder exposed to a strong light
source such as sunlight. Because
of the lens's condensing function,
doing so may cause smoke, fire, or
a malfunction inside the camera
body or the lens. If you have to
leave the camera exposed to a light
source such as sunlight, attach the
lens cap to the lens.
• If sunlight or a strong light source
enters the camera through the lens,
it may focus inside the camera and
cause smoke or fire.
Attach the lens cap to the lens
when storing the camera.
When you shoot with backlighting,
keep the sun sufficiently far away
from the angle of view.
Note that smoke or fire may occur
even if the light source is slightly
away from the angle of view.
• Do not directly expose the lens to
beams such as laser beams. That
may damage the image sensor and
cause the camera to malfunction.
• Do not look at sunlight or a strong
light source through the lens when
it is detached. This may result in
unrecoverable damage to the eyes.
GB
6
• This camera (including accessories)
has magnet(s) which may interfere
with pacemakers, programmable
shunt valves for hydrocephalus
treatment, or other medical devices.
Do not place this camera close to
persons who use such medical
devices. Consult your doctor before
using this camera if you use any
such medical device.
• Do not leave the camera, the
supplied accessories, or memory
cards within the reach of infants.
They may be accidentally
swallowed. If this occurs, consult a
doctor immediately.
Notes on the monitor and
electronic viewfinder
• The monitor and electronic
viewfinder are manufactured
using extremely high-precision
technology, and over 99.99% of the
pixels are operational for effective
use. However, there may be some
small black dots and/or bright
dots (white, red, blue or green in
color) that constantly appear on the
monitor and electronic viewfinder.
These are imperfections due to
the manufacturing process and do
not affect the recorded images in
any way.