Sony A7RIII ILCE-7RM3A Operating Instructions Manual page 462

Hide thumbs Also See for A7RIII ILCE-7RM3A:

Table of Contents

Interchangeable Lens Digital Camera

Wi-Fi Settings: WPS Push

If your access point has a Wi-Fi Protected Setup (WPS) button, you can register the access point to this product easily.

(Network) →[Wi-Fi Settings] → [WPS Push].

Push the Wi-Fi Protected Setup (WPS) button on the access point to connect.

[WPS Push] works only if the security setting of your access point is set to WPA or WPA2 and your access point supports the Wi-

Fi Protected Setup (WPS) button method. If the security setting is set to WEP or your access point does not support the Wi-Fi

Protected Setup (WPS) button method, perform [Access Point Set.].

For details about the available functions and settings of your access point, see the access point operating instructions or contact

the administrator of the access point.

A connection may not be possible or the communication distance may be shorter depending on the surrounding conditions, such

as the type of wall material and the presence of obstructions or radio waves between the product and access point. In this case,

change the location of the product or move the product closer to the access point.