Sony A7RIII ILCE-7RM3A Operating Instructions Manual page 200

Help Guide
Interchangeable Lens Digital Camera
ILCE-7RM3A
α7RIII
Disp. cont. AF area
You can set whether or not to display the area that is in focus when [Focus Area] is set to [Wide] or [Zone], in
[Continuous AF] mode.
MENU → (Camera Settings1) → [Disp. cont. AF area] → desired setting.
1
Menu item details
On:
Displays the focus area that is in focus.
Off:
Does not display the focus area that is in focus.
Note
When [Focus Area] is set to one of the following, the focusing frames in the area that is in focus turn green:
[Center]
[Flexible Spot]
[Expand Flexible Spot]
When an A-mount lens and a Mount Adaptor (LA-EA1/LA-EA3/LA-EA5) (sold separately) are mounted on the camera and [
AF System] is set to [Phase Detection AF], [Disp. cont. AF area] is always turned on regardless of the [Focus Area] settings.
5-026-816-11(1) Copyright 2021 Sony Corporation
109