Sony A7RIII ILCE-7RM3A Operating Instructions Manual page 317

Note
The sound of the lens and the product in operation may be recorded during movie recording.
You can turn the sound off by selecting MENU →
When shooting, the sound of the shoulder strap hooks (triangular hook) could be recorded, depending on the situation used.
To prevent the operating sound of the zoom ring from being recorded during movie recording when a power zoom lens is used,
we recommend recording movies using the zoom lever. When you move the zoom lever, place your finger lightly on the lever and
operate it without flicking.
The temperature of the camera tends to rise when shooting movies continuously, and you may feel that the camera is warm. This
is not a malfunction. Also, [Internal temp. high. Allow it to cool.] may appear. In such cases, turn the power off and cool the
camera and wait until the camera is ready to shoot again.
If the icon appears, the temperature of the camera has risen. Turn the power off and cool the camera and wait until the
camera is ready to shoot again.
For the continuous shooting time of a movie recording, refer to "Recordable movie times." When movie recording is finished, you
can restart recording by pressing the MOVIE button again. Recording may stop to protect the product, depending on the
temperature of the product or the battery.
When the mode dial is set to
In [Program Auto] mode when shooting movies, the aperture value and the shutter speed will be set automatically and cannot be
changed. For that reason, the shutter speed may become fast in a bright environment, and the motion of the subject may not
record smoothly. By changing the exposure mode and adjusting the aperture value and the shutter speed, the motion of the
subject can be recorded smoothly.
When shooting movies, ISO values between ISO 100 and ISO 32000 are available. If the ISO value is set to a value larger than
ISO 32000, the setting is automatically switched to ISO 32000. When you finish recording the movie, the ISO value returns to the
original setting.
In movie shooting mode, ISO sensitivity can be selected from ISO 100 to ISO 32000. If the ISO value is set to a value smaller
than ISO 100, the setting is automatically switched to ISO 100. When you finish recording the movie, the ISO value returns to the
original setting.
In movie shooting mode, the following settings cannot be set in [Picture Effect]. When a movie recording starts, [Off] will be set
temporarily.
Rich-tone Mono.
If you point the camera at an extremely strong light source while shooting a movie at low ISO sensitivity, the highlighted area in
the image may be recorded as a black area.
If the display mode of the monitor is set to [For viewfinder], the display mode will switch to [Display All Info.] when movie shooting
starts.
Use PlayMemories Home when importing XAVC S movies and AVCHD movies to a computer.
Related Topic
MOVIE Button
Movie w/ shutter
File Format (movie)
Recordable movie times
Custom Key (still image/movie/playback)
Focus Area
(Camera Settings2) → [Audio Recording] → [Off].
(Movie) or or when shooting movies, you cannot select [Lock-on AF] for [Focus Area].
5-026-816-11(1) Copyright 2021 Sony Corporation
226