Sony A7RIII ILCE-7RM3A Operating Instructions Manual page 473

Help Guide
Interchangeable Lens Digital Camera
ILCE-7RM3A
α7RIII
Connecting to a computer
Insert a sufficiently charged battery pack into the camera.
1
Turn on the camera and the computer.
2
Check that [USB Connection] under
3
Connect the camera to the computer using the USB cable (A).
4
When you connect the camera to the computer for the first time, the procedure for recognizing the camera may
start automatically on the computer. Wait until the procedure is finished.
If you connect the product to your computer using the USB cable when [USB Power Supply] is set to [On],
power is supplied from your computer. (Default setting: [On])
Use the USB Type-C cable (supplied) or a USB-standard cable.
Use a USB 3.1-compatible computer and the USB Type-C cable (supplied) for higher-speed communications.
Note
Do not turn on/off or restart the computer, or wake the computer from sleep mode when a USB connection has been established
between the computer and the camera. Doing so may cause a malfunction. Before turning on/off or restarting the computer, or
waking the computer from sleep mode, disconnect the camera from the computer.
Related Topic
USB Connection
USB LUN Setting
(Setup) is set to [Mass Storage].
5-026-816-11(1) Copyright 2021 Sony Corporation
382