Chamberlain 882LMW Quick Start Manual

Chamberlain 882LMW Quick Start Manual

Connect your garage door opener to your home wi-fi network
Hide thumbs Also See for 882LMW:

Advertisement

Available languages

Available languages

Connect Your Garage Door Opener to
Your Home Wi-Fi
Get connected and control your garage door opener with the MyQ

Before You Begin

You will need:
• Wi-Fi
®
• Broadband Internet Connection
• Wi-Fi signal in the garage (2.4Ghz required)
• Password for your home network (router's main account, not guest network)
1

Put the door control or garage door opener into Wi-Fi Learn Mode:

Smart Control Panel
Go to Menu > Program > Wi-Fi
Setup. The garage door opener
will beep once. You have
20 minutes to complete the
connection process.
2
On your mobile device, go to Settings > Wi-Fi and select the network with the "MyQ-" prefix.
3
Launch the web browser on your smartphone or tablet. Enter setup.myqdevice.com into the browser address bar.
Follow the on screen prompts to connect the garage door opener to your Wi-Fi network. The MyQ serial number will
display on screen. Write the serial number in the space below.
4
Download the MyQ app from the App Store
serial number to your account.
To add a second Wi-Fi garage door opener, repeat steps 1-3. Add the second MyQ serial number to your account in the
MyQ app. If you are unsuccessful adding your device, try an alternate web browser or visit WiFiHelp.LiftMaster.com.
LiftMaster.com
myLiftMaster.com
Wi-Fi
is a registered trademark of Wi-Fi Alliance.
®
App Store is a service mark of Apple Inc.
Google Play is a trademark of Google Inc.
© 2016, LiftMaster
All Rights Reserved
GDOPro106
enabled smartphone, tablet or laptop
®
Navigation
Buttons
Network
®
Multi-Function Control Panel
(882LMW) and Motion Detecting
Control Panel (886LMW)
Lift the push bar. Press and release
the LEARN button. The garage
door opener will beep once and the
command LED on the door control
will blink to indicate Wi-Fi learn
mode. You have 20 minutes to
complete the connection process.
Learn Button
Command LED
or Google Play™ store. Sign up for your MyQ account and add the MyQ
®
App.
®
Garage Door Opener
Press and release the yellow
LEARN button on the garage
door opener 3 times. The garage
door opener will beep once. You
have 20 minutes to complete the
connection process.
Learn Button

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 882LMW and is the answer not in the manual?

Questions and answers

Summary of Contents for Chamberlain 882LMW

  • Page 1 Put the door control or garage door opener into Wi-Fi Learn Mode: Smart Control Panel Multi-Function Control Panel Garage Door Opener ® (882LMW) and Motion Detecting Go to Menu > Program > Wi-Fi Press and release the yellow Control Panel (886LMW) Setup. The garage door opener LEARN button on the garage will beep once.
  • Page 2 Faire passer la commande de port ou l’ouvre-porte de garage en mode d’apprentissage Wi-Fi : Smart Control Panel Panneau de Commande Ouvre-porte de Garage ® Multifonction (882LMW) et Panneau Naviguer jusqu’à Menu > Enfoncer et relâcher trois fois le bouton de Commande de Porte avec Program (Programme) >...
  • Page 3 Coloque el control de la puerta o el abre-puertas de garaje en Modo APRENDIZAJE de Wi-Fi: Smart Control Panel Panel de Control de Funciones Abre-puertas de Garaje ® Múltiples (882LMW) y Panel Entre a Menú > Programación > Presione y suelte el botón de Control de Detección de Configuración de Wi-Fi. El...

Table of Contents