Table of Contents
Advertisement
5
10
12
New version
Grease nipples (16) and lubrication ducts
have been engineered into the bearing
housings. The exit holes (17) indicate when
the correct amount of grease has been
filled.
16
COMPONENTS – ORIENTATION
3
9
6
2
15
4
9
13
12
11
14
11
13
17
7
8
2
1
13
12
2
11
Components
1. Cutter blade, ring-shaped steel
blade with laser-welded diamond
tips
2. Engagement rollers (behind the
shroud)
3. Blade guard
4. Splash guard
5. Hose for water supply
6. Control for adjustment of water
flow
7. Water disc
8. Lock button for disc drive
9. Knob tensioning the blade
against the drive disc
10 Support roller cover
11 Support rollers (behind the
shroud)
12. Adjustment screws for roller
tension against the blade
13. Lock-nuts for roller adjustment
14 Drive disc (behind the shroud)
15 Transmission cover
16 Grease nipples for lubrication of
the bearing housings
17 Lubrication duct outlets
NOTE
Compared with the hydraulic ring
cutter, the Partner K3600, the
engagement and support rollers have
switched places in the K950 Ring.
The blade's direction of rotation in
relation to the machine is the same
for both machines (dragging blade),
but the blade itself rotates in the
opposite direction.
For this reason, it is important not
to confuse the blades used in these
two machines. Switching between
the direction of rotation causes
added blade wear.
3
3
Advertisement
Table of Contents
