Digital Wrench Diagnostic Software Overview; Digital Wrench Special Tools - Polaris 850 PRO-RMK 155 2020 Manual

DIGITAL WRENCH DIAGNOSTIC
SOFTWARE
DIGITAL WRENCH DIAGNOSTIC SOFT-
WARE OVERVIEW
NOTICE
Refer to Section 2, 3, and 4 in the Instruction Manual
provided in the Digital Wrench® Diagnostic Kit to install
the Polaris Digital Wrench® diagnostic software on your
computer.
On AXYS snowmobiles, Digital Wrench allows the
technician to perform the following tests and diagnostic
procedures:
• View / clear diagnostic trouble codes
• Analyze real-time / vehicle data
• Replace ECU
• Reflash ECU
• Perform guided diagnostics
• Perform output state control testing
• Replace fuel injectors
• Perform EV actuator learning procedure
• Enable / disable / reset security
• Calibrate chaincase gearing / speedometer offset
• Prime electronic oil pump
• Replace electronic oil pump offset code
• Reset fuel injector break-in period timer
• Reset oil pump enrichment period timer
• Perform fuel pump prime
• Replace / reset Throttle Position Sensor (TPS)
NOTICE
If the snowmobile is equipped with a fully-charged
battery, it can be used to supply power to the test
connectors. If using a stand-alone service battery, do
not place the battery in the tunnel footwells. Place the
battery on the floor next to the engine compartment.
9850060 R02 - 2020-2021 850 AXYS™ Long Track Snowmobile Service Manual
© Copyright Polaris Inc.
GENERAL INFORMATION

DIGITAL WRENCH SPECIAL TOOLS

TOOL
PC / Laptop with Microsoft
Windows 98 / XP SP2 /
Vista / 7 / 8
Digital Wrench Diagnostic
Kit
PU-47063–C Includes
Chassis Power-Up
Harness
Next-Gen Service Power
Harness
Dual Power-Up Adapter
Cable
(Used to update the PS-
47296–A Chassis Power-
Up Harness)
Fully Charged 12V
Battery
To obtain Digital Wrench or replacement cables or
modules, contact: Bosch Automotive Service
Solutions 1-800-345–2233 or https://polaris.service-
solutions.com
PART NUMBER
N/A
PU-47063–C
Digital Wrench Software:
PU-48731–A
Interface Cable: PU-
47151
Serial Adapter Cable: PU-
50621
SmartLink Module / Cable
Kit: PU-47471
PU-47471 Includes:
SmartLink Module: PU-
47468
SmartLink Serial Cable:
PU-47470
SmartLink CAN Interface
Cable: PU-47469
PS-47296–B
PS-52573
PS-50805
N/A
1.85
1