Schedule Mode; Schedule Mode For Heating Zone - Computime Salus Controls iT500 Full User Manual

8.3 Schedule mode

8.3.1 Schedule mode for heating zone

You can easily set your schedule via iT500 Plus app
instruction below.
In iT500 thermostat you can define 6 schedule programs per day. You can set different temperature level for each program. While programming specific
time interval you must be aware that you are about to set at what time the program will start. For example, if you set program 1 for 6:00 (AM) it means
the program is going to run at 6:00 (AM) and will running till the time set for next program. Example of 4 temperature levels for 6 schedule programs:
P1
17°C
0 1 2 3
Note: When you set program schedule, necessarily set all 6 programs. I.e. if you want to set 2 temperature levels, you need to set first
temperature level for 1 to 5 program and set second temperature level only for program 6.
1
Press the power button
to highlight the display.
4
Press button to select
temperature zone.*
*(only in two heating zones)
7
Press or
to set start hour for program 1.
Press button to confirm.
P2
22°C
4 5 6 7 8 9 10
2
Press and hold
5
Press
8
button Press
to set start minutes for program 1.
Press
. If you want to set schedules directly by the iT500 thermostat, please follow the
P3
23°C
19°C
11 12 13 14 15 16
button
for 3 seconds.
button to confirm.
or button
button to confirm.
P4 P5 P6
P1
23°C 23°C
17°C
17 18 19 20 21 22
3
Press button to confirm.
6
Press button to choose
ALL, 5/2 or INDIVIDUAL days.
Press button to confirm.
9
Press or
to set temperature level for program 1.
Press
to confirm. Follow the steps 7-9 to set
next programs.
23 24
button
button
41