About It500 Plus Application; Connecting The Gateway To Your Existing Router - Computime Salus Controls iT500 Full User Manual

5. About iT500 PLUS application

Download the iT500 Plus app, create an account and register your device. Follow the on screen instructions to complete all the steps.
Features available only on the App:
• HOLIDAY mode
• Frost protection temperature setpoint change
• Simplified schedule wizard
You can add a few iT500 thermostats to one account.

5.1 Connecting the gateway to your existing router

Red light indicates there
is no connection with
Please note:
If the LED on the iTG500 Internet Gateway is continuously red - check the Internet connection, router settings or contact your ISP. The correct operation
of the gate and the application depends on the fulfillment of the following conditions:
1) The iTG310 Internet gateway must be connected to the LAN output of the router.
2) None of the ports: UDP 80, TCP 80, 2165, 2155, 3155 can be blocked.
3) PoE (power over ethernet) function in LAN output must be disabled.
4) Internet router should include 10/100 auto-negotiation (applies to fiber optic routers and high-speed Internet routers).
5) Some routers, eg the AVM Fritzbox 79xx series, cannot be connected to the gateway with a standard (straight) Ethernet cable. In this case, use an
Ethernet crossover cable.
Easy to use interface.
Internet
Simple to modify heating
schedules. Choose from ALL,
5/2 or INDIVIDUAL days.
iT500 Plus
With walk through tutorials
on how to use the App.
Green light indicates iTG500
connected with Internet and
Salus Controls Server.
23