Control Technology 2500 Series Manual page 5

2598 8/16-Point
AC Discrete Output Module
CAUTION – Non-Hazardous Areas/Hazardous Areas
WARNING – EXPLOSION HAZARD. DO NOT
REMOVE OR REPLACE WHILE CIRCUIT IS LIVE
UNLESS THE AREA IS FREE OF IGNITIBLE
CONCENTRATIONS.
WARNING – EXPLOSION HAZARD. DO NOT
REMOVE OR REPLACE FUSE WHEN ENER-
GIZED.
Turn off power to the system before replacing fuses either in power supplies or IO modules. Refer to Product
Bulletin or Installation and Operation Guide for specific information on the correct fuse for replacement. If
there are any questions please contact CTI support. Fuses should only be replaced by qualified technicians.
Copyright© 2021 Control Technology Inc.
AVERTISSEMENT – RISQUE D'EXPLOSION. NE
PAS RETIRER NI REMPLACER PENDANT QUE LE
CIRCUIT EST SOUS TENSION À MOINS QUE
L'EMPLACEMENT NE SOIT EXEMPT DE
CONCENTRATIONS INFLAMMABLES.
AVERTISSEMENT – RISQUE D'EXPLOSION. NE
PAS RETIRER NI REMPLACER UN FUSIBLE SI
L'APPAREILLAGE EST SOUS TENSION.
All Rights Reserved
5
25 October 2021