Table of Contents
Advertisement
Remote control battery replacement
This remote control requires x1 CR2025 battery to operate.
1. Press the buckle on the battery cover inward and pull the battery slot out. Remove the
old battery.
2. Identify the battery polarity and insert a new battery onto the slot.
3. Place the battery slot back into the bottom of the remote control.
The remote control should be pointed at the remote-control signal receiver on the display to
maximize the remote-control signal.
Notes:
• If the remote control will not be used for an extended period, remove the battery.
• This battery is not rechargeable.
Press the timer button on the remote control to set 1 to 8 hours. Press
the timer button on the remote control, the display shows: "0" to
cancel the timer.
After the timer function is set, other functions can be used normally.
When the device is turned off, the timing setting is also cancelled.
Buckle
9
Advertisement
Table of Contents
