Table of Contents
Advertisement
Set device in pairing mode
When the device is first turned on, it may automatically enter pairing mode (the touch
screen display will be flashing "F").
If not automatically in pairing mode when powered on, you can manually set the device in
pairing mode by pressing and holding the touch screen button for 5 seconds until you hear
three beeps and the touch screen display begins flashing "F".
Add device through network
5.
Once registered, tap "+" in the upper right corner of the app's home page to add a
new device through the network.
6.
Select the fan heater type from the list of options in the app (Heating & Cooling >
Fans).
7.
Ensure that the device is in pairing mode, with the Wi-Fi light indicator flashing,
and tap "Confirm light is rapidly flashing".
13
Advertisement
Table of Contents
