Table of Contents
Advertisement
AP mode connection steps
Set device in pairing mode
To set the device for AP mode pairing, press and hold the touch screen button for an
additional 5 seconds until it beeps another three times. The touch screen display will flash
"F" slowly to confirm AP mode.
Using AP Mode to add device
5.
Once registered, tap "+" in the upper right corner of the app's home page to add a
new device through the network.
6.
Select the fan heater type from the list of options in the app (Heating & Cooling >
Fans), and then select "Other Mode" from the top-right corner when asked to reset
the device.
15
Advertisement
Table of Contents
