Table of Contents
Advertisement
Host Operation
Installing on Wind Kreis
Set the wind outlet after fan has stopped.
Hold fan body with one hand and set the wind outlet 15° before and after.
Switch on and off
Connect the power supply, the LED display lights up and the machine goes into
standby mode.
Click the host's power button, the buzzer will beep once and the fan will start.
Press and hold the power button for 2 seconds, the buzzer will beep twice and the fan
will stop running after you release your hand.
Set the air volume
When the host is operating: Click the button to adjust the air volume from 1 to 9.
Oscillation
When the host is operating, press and hold the screen touch button for 1 second. The
buzzer beep once and the fan starts to oscillate. Press and hold the screen touch button
again for 1 second. The buzzer beep once and the fan stops oscillating.
11
Advertisement
Table of Contents
