Table of Contents
Advertisement
12.
Drive Speed -
• RT Machines: Indicates whether
high drive speed (rabbit), low
drive speed (turtle), or differential
lock
(2WD
only) has
selected on the platform control console.
• ERT Machines: Indicates whether
high drive speed (rabbit) or low
drive speed (turtle) has been
selected on the platform control
console.
13.
DTC Messages Display - Displays any active DTC messages.
The system fault indicator will also flash the appropriate
flash code for the DTC. If no DTCs are active, this area of the
display remains blank.
14.
Lift/Lower Indicator - Indicates if lift mode
has been selected on the platform control
console.
31217162
SECTION 3 - MACHINE CONTROLS, INDICATORS, AND MACHINE OPERATION
been
15.
Maximum Allowed Platform Height - Maxi-
mum allowed platform height as calculated by
LiftSense system. The number is green when
maximum platform height can be reached. If the
machine is unable to reach maximum height, the
number will change from green to yellow.
16.
Battery State-of-Charge - Displays the bat-
tery state-of-charge for ERT machines in 5%
increments. The bar remains green until 25%,
after which it turns red and reads "LOW" until
it reaches above 25% again.
17.
QuikLevel Advanced Indicator
(If Equipped) - Indicates if QuikLevel
Advanced function has been selected.
3-21
Advertisement
Table of Contents
