Table of Contents
Advertisement
SECTION 3 - MACHINE CONTROLS, INDICATORS, AND MACHINE OPERATION
DO NOT USE HIGH DRIVE SPEED WHEN DRIVING IN CLOSE QUARTERS OR WHEN DRIV-
ING IN REVERSE.
7.
Leveling Jacks or QuikLevel Advanced Switch - This
switch engages the leveling jacks or the QuikLevel
Advanced system.
8.
Mobile Phone Slot - Provides an enclosed area to the opera-
tor in which to place a mobile phone device.
9.
Dual Fuel Selection (If Equipped) - Switches between LP
and gas usage when pressed.
10.
Generator Switch (If Equipped) - Enables the generator
that supplies AC power to the platform.
11.
USB Charge Port - Provides a USB charge port to the opera-
tor.
12.
Indicator Display - Shows a variety of machine operation
information. Refer to Section 3.9, Platform Control Indicator
Display, for more information.
3-14
13.
Steer Control Switch - The thumb-operated steer switch on
top of the joystick controller activates the steer wheels in the
direction it is moved (right or left).
14.
Joystick Controller with Trigger (Enable) Switch - The joy-
stick controls four functions: drive; lift; drive/lift speed; or
leveling jacks (if equipped), or dual oscillating axles (if
equipped). All function buttons must be selected prior to
engaging the joystick. The speed is controlled by the travel
distance of the joystick.
NOTE:
If the machine is also equipped with a footswitch (Korea market
only), the footswitch must be pressed in conjunction with the the
trigger (enable) switch located on the joystick controller. Power is
removed from the platform controls when the footswitch is
released.
NOTE:
Once a function has been selected, the operator has seven sec-
onds to engage the function.
15.
Genset Enable Switch (If Equipped) - Enables the ERT gen-
set system.
31217162
Advertisement
Table of Contents
