Table of Contents
Advertisement
SECTION 3 - MACHINE CONTROLS, INDICATORS, AND MACHINE OPERATION
The Display Gauge shows machine hours and DTCs. During
machine start up, with no active DTCs in the control system, the
splash screen will show for 3 seconds and then switch to main
screen. If there is an active DTC while powering up the machine,
the splash screen will show for 3 seconds, and then launch the
Diagnostics Screen. The indicator lamp will light when there is an
active DTC in the Fault Log.
Splash Screen
3-10
The Diagnostic Screen will show active and inactive faults from
the JLG Control System on the screen. An asterisk (*) will be dis-
played to show active faults.
Diagnostic Screen
31217162
Advertisement
Table of Contents
