Table of Contents
Advertisement
SECTION 2 - USER RESPONSIBILITIES, MACHINE PREPARATION, AND INSPECTION
Begin the Walk-Around Inspection at Item 1, as noted on the dia-
gram. Continue to the right (counterclockwise viewed from top)
checking each item in sequence for the conditions listed in the
following checklist.
TO AVOID POSSIBLE INJURY, BE SURE MACHINE POWER IS "OFF" DURING WALK-
AROUND INSPECTION.
DO NOT OVERLOOK VISUAL INSPECTION OF CHASSIS UNDERSIDE. CHECKING THIS
AREA OFTEN RESULTS IN DISCOVERY OF CONDITIONS WHICH COULD CAUSE EXTEN-
SIVE MACHINE DAMAGE.
NOTE:
On each item, make sure there are no loose or missing parts, that
they are securely fastened, and that no visible damage exists in
addition to any other criteria mentioned.
1.
Ground Controls - Placard secure and legible, control
switches return to neutral position when activated and
released, emergency stop switch functions properly. Control
marking legible.
2-8
2.
Fuel Tank (Diesel or Gasoline) (If Equipped) - Filler cap
secure, no damage or leaks.
3.
Hydraulic Tank - Recommended hydraulic fluid level on
level indicator on tank. Breather cap secure and working. No
damage or leaks.
4.
Main Control Valve - No unsupported wires or hoses; no
damaged or broken wires.
5.
Battery Installation (If Equipped) - Proper electrolyte level,
cables secure, no damage or corrosion. Hold-downs secure.
6.
Propane Tank (If Equipped) - Refer to Inspection Note.
7.
Battery Charger (If Equipped) - Refer to Inspection Note.
8.
Battery Disconnect (If Equipped) - Refer to Inspection
Note.
9.
Front Oscillating Axle - Refer to Inspection Note.
10.
Leveling Jacks Assembly (If Equipped) - Refer to Inspec-
tion Note.
11.
Ladder - No damage, securely attached.
31217162
Advertisement
Table of Contents
