Table of Contents
Advertisement
SECTION 6 - GENERAL SPECIFICATIONS AND OPERATOR MAINTENANCE
NOTE:
Hydraulic oils must have anti-wear qualities at least to API Ser-
vice Classification GL-3, and sufficient chemical stability for
mobile hydraulic system service. JLG Industries recommends the
use of standard UTTO.
NOTE:
Machines may be equipped with biodegradable and non-toxic
hydraulic oil. This is a fully synthetic hydraulic oil that possesses
the same anti-wear and rust protection characteristics as min-
eral oils, but will not adversely affect the ground water or the
environment when spilled or leaked in small amounts.
6-10
NOTE:
Aside from JLG recommendations, it is not advisable to mix oils
of different brands or types, as they may not contain the same
required additives or be of comparable viscosities. If use of
hydraulic oil other than standard UTTO is desired, contact JLG
Industries for proper recommendations.
NOTE:
When temperatures remain consistently below 20° F (-7° C), JLG
Industries recommends the use of a premium cold weather
hydraulic fluid (viscosity grade 32).
31217162
Advertisement
Table of Contents
