Seal The Openings; Assemble Surface Burners - GE Caf�© C2S980SEMSS Owner's Manual & Installation Instructions

Installation of the range.

Seal the Openings

Seal any openings in the wall behind the range
and in the floor under the range when hookups
are completed.

Assemble Surface Burners

Burner Heads (on some models)
Place burner heads over the electrodes
on the cooktop, in the correct locations
according to their size. There is one small, one
medium, one extra large and one dual flame
extra large burner head.
Medium head
Extra large
head
Front left, back right and back left burners
Burner cap
Burner
head
Stability
chamber
Burner base
Make sure the slot
in the burner head
is positioned over
the electrode.
Oval (Center) Burner Head/Cap Assembly
Place the oval (center) head/cap assembly
over the electrode on the cooktop.
Oval head and
cap assembly
Front of range
50
Small head
Dual flame
Front of range
extra large head
Front right burner
Burner cap
Burner
head
Electrode
Electrode
Make sure the hole in the burner head
assembly is positioned over the electrode
and that the burner head is fully inserted
inside the burner base. A small gap
between the base and head is normal.
Make sure the slot
in the burner head
is positioned over
the electrode.
Electrode
Caps
Place the matching size caps onto the burner
bases or heads.
Medium cap
Extra large cap
Make sure that the heads and caps are
replaced in the correct locations.
Grates
Place the left, right and center grates on the
cooktop. These grates are position specific.
The undersides of the left and right grates are
marked "OUTSIDE." Place the middle grate with
its bowed front toward the front of the range.
Burner
base
Outside grate
CAUTION:
without all burner parts in place.
Slot
Small cap
Dual flame extra
large cap
Front of range
Center grate Outside grate
Do not operate the burner