Cleaning Instructions - Goldstar HB-152CE Instructions & Cooking Manual

CLEANING INSTRUCTIONS

CLEANING (Always unplug unit)
ANY SERVICING REQUIRING DISASSEMBLY, OTHER THAN THE CLEANING DESCRIBED
BELOW, SHOULD BE PERFORMED BY AN AUTHORIZED SERVICE REPRESENTATIVE.
• Avoid using any cleaning agent other than dish detergent.
• Do not use steel wool or other abrasive materials.
• Do not wash the removable any parts in the dishwasher.
• Do not immerse the bread pan in water. Wipe clean with a damp cloth, then dry thoroughly.
• Wipe the shaft with a soft cloth or sponge to prevent damage to the seal packing.
• Allow to dry before storing the pan inside the bread machine.
• It is not necessary to remove the kneading blade for cleaning. But if you wish to, it must be
removed after each use.
SEAL PACKING
• Wipe the exterior with a damp dishcloth after each use. Do not immerse in or splash with water.
• After using, cool and wipe out the oven interior with a damp dishcloth or plastic scouring pad.
• To remove, fill the pan with hot soapy water and allow it to soak for 20 minutes. Wash it with a
soft brush or cloth and dry thoroughly.
• Do not use metal utensils inside the machine. They will damage the non-stick coating. If the
bread sticks to the lid, use a plastic pancake turner to clean.
NOTE : The non-stick coating may change color over time. This is caused by moisture and steam
and in no way affects performance.
STORING
• Be sure bread machine is completely cooled before storing.
• All removable parts should be thoroughly cleaned and dried.
• Store bread machine with lid closed.
SHAFT
-7-
KNEADING BLADE