Programming The Delay Timer (Bread Or Dough); Baking Control (Bread) - Goldstar HB-152CE Instructions & Cooking Manual

Programming The Delay Timer (Bread or Dough)

Set the program and crust color. Before pressing START, set the timer for however long
you want to wait before the bread is done: 4:10 to 13 hours.
EXAMPLE : It is 9:00 p.m. now. The bread is to be ready at 6:30 a.m. the next morning.
Set the timer for 9:30, because there are 9 hours and 30 minutes between 9:00 p.m. and 6:30 a.m.
TIMER
TIMER
START

Baking Control (Bread)

The Baking Control function is used to select the color of the crust. It can be baked medium,
light or dark. It is not necessary to press the control when medium is desired.
BAKING CONTROL
A MEDIUM
B LIGHT
C DARK
POWER OUTAGE
If your bread machine loses power before the second rise, you can try starting the machine at the
beginning of the cycle again. This may not always produce an acceptable loaf. If you are not sure
when the outage occurred, remove the dough ball from the bread pan and place in an oven-
safe baking container. Allow to double in size and place in a preheated 350° oven for 30-45 min-
utes or until done.
The bread should hollow when tapped on the top of the loaf after done.
If the bread has already begun to bake when the outage occurs, you must begin with new ingredi-
ents.
1. When pressed, the time will advance in
10 minute increments.
2. When constant pressure is applied to
the pad, the time will advance quickly.
3. Press the START pad. The timer is set,
and the colon blinks. After one minute,
9:29 is displayed, and the timer contin-
ues to count down in 1 minute incre-
ments.
The Baking Control function will advance as the pad is
pressed.
A
MED
NOTE : The bread machine
will star t when the timer
reaches the time of the pro-
gram selected.
B
LIGHT
-11-
Colon will blink
C
DARK